Mağaza Sayfası
Cities: Skylines
Tümü Tartışmalar Ekran Görüntüleri Çizimler Yayınlar Videolar Atölye Haberler Rehberler İncelemeler

Cities: Skylines

Mağaza Sayfası
Cities: Skylines >  Atölye > SpacePixel Kullanıcısının Atölyesi
291 oy
Metal Awning prop
Açıklama Tartışmalar0 Yorumlar13 Değişiklik Notları
   
Ödül
Favorilere Ekle
Favorilere Eklendi
Favorilerden Çıkar
Assets: Prop
Dosya Boyutu
Gönderilme
6.590 MB
5 Oca 2017 @ 6:20
1 Değişiklik Notu ( görüntüle )
Oluşturan
SpacePixel
Çevrimdışı
5167 koleksiyona göz atın (bazıları gizli olabilir)
20,557 Tekil Ziyaretçi
24,321 Mevcut Abone
797 Mevcut Favoriler

İndirmek için abone ol
Metal Awning prop

Açıklama
This is an awning. Or, maybe, tent. Or even canopy. I don't exactly know what it is. To be clear, it is a sheet of metal and some beams. Metal beams. And this sheet of metal is fixed on this metal beams. This sheet of metal can protect you and your sh!t from rain or sun. Or even from Zeus' lightning, if you have some problems with Greek gods.

Triangles: 1298
Texture: 2048x2048
You will probably ask: why are there so many triangles and why is texture resolution so high? The answer is simple: this prop is big, nearly 15 meters in lenght or something, so it has to have good textures and good model quality, because otherwise it will looks awful at close range.

Recommended mods:
More Beautification for in-game placement.
Adaptive Prop Visibility Distance because of scale and autogenerated LOD.

Probable next release: T-wall
13 Yorum
< >
CertainDeath 17 Eyl 2019 @ 8:25 
you have to set is as static and indestructible, so that a zeus lightning does not destroy it.
However, its pretty decent for hiding MHQs from Noobfor Players :)
Cloud 9 May 2019 @ 15:15 
Thumbs up just for the description XD
Avanya 7 Oca 2017 @ 6:06 
@SpacePixel: Finally had time to take a look at this and templeofdoom's advice is spot on. Using the full width of a 1024x1024 texture (or maybe 1024x512) for the roof and then putting all the UVs for the legs on the rest overlapping as much as you can should help you get a result just as good-looking as now but with a smaller texture. :)

If you want to go smaller, you can cut the roof in two parts and overlap them. Then 512x512 should be enough. Sounds great you found some guides - luckily there's loads of them out there. :D
SpacePixel  [yaratıcı] 6 Oca 2017 @ 2:22 
Thank you guys very much, I've found a wonderful guide and am practicing now!
templeofdoom 5 Oca 2017 @ 13:21 
Oh - and I forgot to add another important tip - "Mirror Modifier" on symmetrical props and assets (think props like this, or buildings that are symmetrical) as they will greatly help reduce UV mapping size too - check out tutorials on YouTube for how to utilize that - it would have worked great on this model for instance since this model is almost symmetrical.
templeofdoom 5 Oca 2017 @ 13:10 
Avanya is the person to give you great advice SpacePixel - their quality of assets surpasses my skill levels! But I think you would greatly benefit from learning how to stack UV shells so that you can use the same texture space over multiple faces of UV's on your model. Have a section of wall on a building that keeps repeating? Stacking shells can make use of a smaller texture space, but keep the resolution good. Hopefully Avanya can give you better pointers than I can. But of course let me know if I can help! :) If you use GIMP, liquid rescale is a good plug-in you can download to help prevent your textures from becoming pixel soup from scaling in the editor too much.
Avanya 5 Oca 2017 @ 12:59 
@SpacePixel: Sure, I'll have a look at the model tomorrow and see if I can give you some pointers. :)
SpacePixel  [yaratıcı] 5 Oca 2017 @ 12:54 
@Avanya, @templeofdoom, I tried to downgrade texture resolution to 1024x1024, but then everything becomes too blurry... But if you know some tricks, which can help with improving roof textures quality without increasing UV map resolution, please, help me a bit or show me related guide and I will update this prop. Maybe, it's possible to merge identical polygons into a one on UV map to clear some space for big polygons?
Avanya 5 Oca 2017 @ 12:11 
I gotta agree with templeofdoom - at least 1024x1024 or even better 512x512 textures would be better for this and the difference will prob barely be visible even with zoom mods. 2048x2048 should really only be used for large unique buildings. :)
Tim The Terrible 5 Oca 2017 @ 12:01 
I never knew I needed this so much! Awesome addition!