King Paris, what do you mean that the radiator isn't positioned the correct way? If the radiator is vertical, the tubes has to be at the bottom, because AIO's isn't filled 100% with coolant, and if you got your tubes at the top, you can have some airgabs, and that could leed to higher temps.

I love that strix white btw. Keep it frosty.

https://www.youtube.com/watch?v=DKwA7ygTJn0

Thanks for the info. I mounted it that way, so the air is trapped on the upper side of the radiator. If for some reason air does get back down there and into the pump area I'd notice pretty quickly. But I wanted to avoid air in the tube section, hoping that it never gets to the pump in the first place. I dont think it should unless I tilt my pc. what do you think?

The tubes would be long enough if the radiator was positioned in the correct way. The tubes coming out of the radiator should be at the top instead of the bottom, those tubes should always be in a position where they are above the pump (which is the part that you mount to the motherboard to cool the CPU). By positioning the radiator in the correct orientation you'll be able to rotate the pump left so that the logo and pump are in the correct position, making your build look better and also decreasing your risk of burning out your CPU as the way you have it currently can cause an air pocket inside the pump decreasing your cooling performance and can burnout your CPU from heating issues.

Had to install cooler that way because the tubes werent long enough
About the gpu pins, must be the angle or I think I did adjust the gpu cables. doesnt look that bad rn.
Whats even worse is the hole on the bottom right, maybe diffrent cooler or slap a display in that corner

And the pin connectors for the gpu, why does it block the ram?

Why is the ROG logo rotated?

If you have curious or hyper animals at home I'd be careful

The micro USB on the pump is for lightning, sadly no custom images on this one.
About dust; I expected worse. Having it since January 1st. GPU Ribs still looking clean. Surface can just be blowed down in couple seconds, all sides are open. Filter leading to backpanel had some dust on it too.

2 questions: is there a usb cable plugged to the AIO pump? and also how much dust is acumulating on the components?

Nice one!~~