Space Engineers

Space Engineers

69 vurderinger
Artakha Battleship
   
Utmerkelse
Favoritt
Favoritter
Fjern som favoritt
Type: Blueprint
Mod category: Exploration
Filstørrelse
Lagt ut
29.938 MB
28. mai 2019 kl. 6.50
1 endringslogg ( vis )
Du trenger nedlastbart innhold for å bruke denne gjenstanden.

Abonner for å laste ned
Artakha Battleship

I 1 samling av revox79
Europan Isles Protectorate
13 gjenstander
Beskrivelse
Created by the Europan design bureau the Artakha class battleship is the emergent product of the Gen2 line of aerospace craft. After the encounter with the extra-solar entity known as [REDACTED] The E.I.P. military counsel decided to accelerate development of the new generation of Artakha battleships. Whilst the design was not given time to complete a testing period, Recent combat engagements with the U.E.R. fleets have shown the Artakha to be a destructive juggernaut in any active engagement across the system.


Name: Artakha
Class: Battleship
Mass:12,617,590
Block Count: 6,508
Area of Operation: Planetary atmosphere(1G), Space, Gravity well



Weapons:
-Gatling Turrets X32
-Missile Turrets X6
-Rocket Launchers X24
-Interior Turrets X39


Specialized Systems:
-Heavy Turrets X2
-Spinal Heavy Repeater Cannon
-Nuclear missiles X4 (Reloadable)
-Regenerative Hull


Production Systems:
-Basic Assemblers X10
-Assemblers X13
-Refineries X2


Credits :
Scripts by: MMaster, Whiplash141, PL1L1P, Rdav, Alysius
24 kommentarer
alexbali255 21. mai 2023 kl. 10.21 
PCU is ~127,000
BlueRap 6. mai 2021 kl. 1.33 
What's the PCU count?
Johnny Five 13. okt. 2020 kl. 22.35 
Beautiful ship>Built in survival in a few hours. However had problems others have had.. connectors didn't go to O2, assemblers, refiners.. anything.. welders were turned so nothing would past thru.. basic assemblers have 1 entry point.. and with a solid block there nothing gets in.. cut off route. Spent a few hours trying to fix but not worth the time. Great looking ship.. but issues...
revox79  [skaper] 27. juni 2020 kl. 3.26 
@xXGuN_sLiNg3r98 missiles are produced trough welders, the attachment points for the missiles are on rotors in the engine pods
xXGuN_sLiNg3r98 26. juni 2020 kl. 16.56 
I put this in a projector on survival and after 1 month it was built.............with no "missles"
any help would be great
butcher04 29. feb. 2020 kl. 8.59 
@revox79 The hangar is a bit cramped, even a small driller enters very tightly. Sometimes the driller is pinned by a door). The battleship is simply beautiful! Dual guns did not work, they were replaced with MK3 guns, they look smaller, but they shoot and do not load the system with scripts. Reinforced the bow with heavy armor, since it breaks easily. I look forward to something no less amazing!
The original dual guns does not recharge because the main conveyor in the guns is not installed correctly, it is not connected to the rotor part.
revox79  [skaper] 25. jan. 2020 kl. 9.11 
@butcher04 side connectors are mainly for docking, supplies are the easiest to load from the hangar. Repair system is made to cover most vitals/ plating and is integrated with the missile reload. As for the heavy gun ammo not pulling trough, rotors more than likely are interfering
butcher04 21. jan. 2020 kl. 20.05 
The side connectors are not connected anywhere, and the conveyor network is divided into several parts. For example, the loading of ore to be processed manually through the containers. The repair system is also not centralized, it is difficult to monitor the availability of materials for repair because of this. I connected the conveyors, but there was a problem with a double heavy gun. It is connected to the pipeline, but the transfer of ammo does not occur, the reason is not clear. The front gun rotates in azimuth, while the rear gun rotates up and down. How do I fix it?
maverick 21. juli 2019 kl. 14.44 
nice ship ill try to build it soon
Maxwell 24. juni 2019 kl. 9.39 
Wonderful ship