訂閱以下載
DynamicMap

The controller generates a dynamic map with an arrow at the current position which points in the direction of travel.
It featured a dynamic zoom function as well as a waypoint system.
The dynamic zoom can easily configured in the editor.
The Map can Focus the Waypoint or the Player

The controller works on all displays. I recommend at least 2x2.

To work properly the following must be connected:
GPS sensor (GPS X & GPS Y)
Compass Sensor (Direction)
X & Y point for the waypoint (Destination X & Destination Y)
Composite Input (Toggle Waypoint Mode)
Button to show or hide waypoint (Not important when in Focus-Waypoint Mode)

Dynamic zooming needs an input. If the input is not given, it always takes the minimum zoom.
The minimum / maximum value can be adjusted via sliders. The field 'input to max zoom' controls at which value the maximum zoom level is reached. This allows the controller to adjust the zoom of the map based on the current speed.
If you use the speed to adjust the zoom level, I recommend setting the maximum value slightly lower than the required value to avoid zoom-hooping.

You could change the focus of the map via composite (default is the touch screen function of the display) but if you want to have another input is the composite channel 1.

Dynamic Zoom:


If you have any questions let me know