never give up

ULTA MEGA ZUPA

skibidi yes yes yes dop dop dop dabudu dabudu yes yes

The displacement of the engine was dropped slightly from 2144 cc to 2133 cc with a bore x stroke of 79.3 mm × 86.4 mm (3.1 in × 3.4 in) for the Rally car so that Audi could satisfy the 3-litre rallying class with a 1.4 times multiplication factor. Valvetrain was DOHC 4 valves per cylinder (20 valves in total) with an oil cooled KKK K27 turbocharger at 1.03 bars (14.9 psi) and Air-to-Air - Längerer & Reich intercooler fed by Bosch LH-Jetronic fuel injection, generating 225 kW (306 PS; 302 hp) at 6,700 rpm and 350 N⋅m (258 lbf⋅ft) of torque at 3,700 rpm.[9]

European market
Audi introduced the original Quattro to European customers in late 1980,[4] featuring Audi's quattro permanent four-wheel drive system, and the first to mate the front-engine, four-wheel-drive layout with a turbocharged engine.[4]

The original engine was the 2,144 cc (2.1 L), longitudinally-mounted inline-5-cylinder 10 valve SOHC, with a turbocharger and intercooler. It generated 147 kW (200 PS; 197 hp) and torque of 285 N⋅m (210 lbf⋅ft) at 3,500 rpm, propelling the Quattro from 0 to 100 km/h (62 mph) in 7.1 seconds, and on to a top speed of over 220 km/h (137 mph).[4]

Production history
The idea for a high-performance four-wheel-drive car was proposed in 1977 by Audi's chassis engineer, Jörg Bensinger, after he found that the Volkswagen Iltis military vehicle could outperform other vehicles when tested in the snow. An Audi 80 variant was developed in co-operation with Walter Treser, Director of Pre-Development.[7][8]